Feuling Engine high flow cam support plates Twincam models 2000-up
Increases engine oil flow and volume by enlarging critical oil passages and oil pump reservoirs
Blueprinted and matched to Feuling® oil pumps which allows Twin Cam engine to take full advantage of increased volume from oil pumps.
Made of 7075 billet aluminum which increases strength and hardness of cam plate, holds tighter tolerances under temperature and eliminates need for pinion shaft bushing
Increases oil flow to pinion shaft and connecting rod bearings and provides cooler engine and oil tempsTighter cam bearing bore tolerance for improved press fit
Decreases engine temperature by as much as 35 degrees FPressure relief valve and spring are pre-set and designed for increased volume and pressure, eliminating the need to stretch the spring or use a shim
Includes bearing retainer plate and hardware Bolts to stock location
CAM PLATE PART #0920-0006 includes military spec hard anodized, bearing retainer plate and hardware; use Feuling oil pump PART #s 0932-0018 and 0932-0020
CAM PLATE PART #0925-0109 includes military spec hard anodize, bearing retainer plate, tensioner pins and chain guide tower; use Feuling oil pump PART #s 0932-0018 and 0932-0020
CAM PLATE PART #0925-0110 features tighter cam journal bore tolerance for improved cam fitment, added cam journal oil groove for cold start up protection and increased cam journal lubrication and added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear; uses Feuling® oil pump PART #s 0932-0023 and 0932-0026
CONVERSION CAM PLATE PART #0925-0440 is made of 7075 aluminum and has original style 99-06 Twin Cam cam bearing bores for use with press in bearings and is designed to use new style 07-12 "factory" hydraulic chain tensioner system with original 99-06 Twin Cam style camshafts; includes bearing retainer plate and hardware, requires the purchase of factory hydraulic chain drive tensioners and uses Feuling® oil pump PART #s 0932-0023 and 0932-0026
Made in the U.S.A.NOTE:
For use ONLY with Feuling® oil pumps only
part numbers
Blueprinted and matched to Feuling® oil pumps which allows Twin Cam engine to take full advantage of increased volume from oil pumps.
Made of 7075 billet aluminum which increases strength and hardness of cam plate, holds tighter tolerances under temperature and eliminates need for pinion shaft bushing
Increases oil flow to pinion shaft and connecting rod bearings and provides cooler engine and oil tempsTighter cam bearing bore tolerance for improved press fit
Decreases engine temperature by as much as 35 degrees FPressure relief valve and spring are pre-set and designed for increased volume and pressure, eliminating the need to stretch the spring or use a shim
Includes bearing retainer plate and hardware Bolts to stock location
CAM PLATE PART #0920-0006 includes military spec hard anodized, bearing retainer plate and hardware; use Feuling oil pump PART #s 0932-0018 and 0932-0020
CAM PLATE PART #0925-0109 includes military spec hard anodize, bearing retainer plate, tensioner pins and chain guide tower; use Feuling oil pump PART #s 0932-0018 and 0932-0020
CAM PLATE PART #0925-0110 features tighter cam journal bore tolerance for improved cam fitment, added cam journal oil groove for cold start up protection and increased cam journal lubrication and added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear; uses Feuling® oil pump PART #s 0932-0023 and 0932-0026
CONVERSION CAM PLATE PART #0925-0440 is made of 7075 aluminum and has original style 99-06 Twin Cam cam bearing bores for use with press in bearings and is designed to use new style 07-12 "factory" hydraulic chain tensioner system with original 99-06 Twin Cam style camshafts; includes bearing retainer plate and hardware, requires the purchase of factory hydraulic chain drive tensioners and uses Feuling® oil pump PART #s 0932-0023 and 0932-0026
Made in the U.S.A.NOTE:
For use ONLY with Feuling® oil pumps only
part numbers
- 0925-0110: for gear or chain drive cams in 2006 Dyna and all 2007-up twincam
- 0920-0006: for gear drive cams in 1999-2006 twincam (except 2006 Dyna)
- 0925-0109: for chain drive cams in 1999-2006 twincam (except 2006 Dyna)
conversion plate
- 0925-0440: for chain drive cams in 1999-2006 twincam (except 2006 Dyna)
